抗离群值的鲁棒正则化贯序超限学习机

针对离群值环境下的在线学习问题,提出一种鲁棒正则化贯序超限学习机(Robust regularized online sequential extreme learning machine,RR-OSELM)。RR-OSELM以增量学习新样本的方式实现在线学习,并在学习过程中基于样本的先验误差进行逆向加权计算以降低学习模型对于离群值的敏感性;同时RR-OSELM通过融合使用Tikhonov正则化技术进一步增强了其在实际应用中的稳定性。实验结果表明,RR-OSELM具有较同类算法更好的鲁棒性和实用性,对于离群值环境下的在线建模与预测问题是积极有效的。     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

激光冲击强化对钛合金高温微动疲劳寿命的影响

为了解高温工作环境下激光冲击强化工艺(LSP)对钛合金材料微动疲劳寿命的影响,开展了强化前后TC11钛合金在室温、300°C和500°C下的微动疲劳试验并测试了试验件表层的残余应力及硬度。结果表明:随着温度的升高,激光冲击强化对TC11钛合金微动疲劳寿命的提高倍数逐渐减小。在轴向载荷为400MPa,法向载荷为65.5MPa时,经激光冲击强化后TC11钛合金试验件在室温、300°C和500°C下的微动疲劳寿命分别为强化前的5.5倍、3.5倍和1.7倍;强化后试验件表层的残余应力会在高温下发生松弛,且松弛程度会随温度的升高而增大,这是激光冲击强化效果随温度升高而逐渐弱化的主要原因。     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

亚声速进气道设计敏感参数仿真分析

对不同气动布局的两种亚声速进气道建模,并针对两种进气道的敏感参数进行分析。通过对背部双发布局飞机进气道的隔道高度和喉道设计马赫数参数的研究可知,隔道高度增大或者喉道设计马赫数减小,使得进气道出口总压恢复系数增大,增量约0.5%。而对背部单发复杂形状进口(M型进口)布局飞机进气道的喉道形状研究显示,喉道形状越接近进口形状,进气道性能越好,较其他喉道形状进气道,M型喉道进气道出口总压恢复系数最高,最大增量约为1.5%。     

微小卫星低可观测外形飞行姿态规划

为提高在轨微小卫星的使用效能及生存能力,提出一种微小卫星低可观测外形飞行姿态规划算法.根据微小卫星雷达散射截面(RCS)、轨道及雷达威胁特性,建立了可进行长时间内最佳飞行姿态规划的数学模型,设计了低计算复杂度的链表式个体结构及进化规划策略,并实现了算法对高威胁区优化规划的能力.同时,算法低迭代步长下的快速收敛特性以及进...     

面向空域/时域/功能混合模式的目标分组方法

提出了面向空域/时域/功能混合模式的目标分组方法,其结果为任务规划提供了包含空域、时域、功能的目标群体特征.该方法采用标准化方法对属性数据分类和扩展,按照不同类型属性数据分别建立属性差异度,提高了目标分组特征属性的可扩展性,解决了传统属性差异度难以适用于时域及功能属性的问题;在此基础上,综合考虑协同任务对目标分组各项属性的定性/定量要求、阈值约束及重要程度要求,构造了目标综合差异度,解决了某些属性不能直接加权的问题.仿真结果表明该方法能够快速有效地实现满足任务复杂要求的目标分组.